JBLPRX-710

Danh mục: JBL Liên hệ

10" Two-Way Multipurpose Self-PoweredSound Reinforcement System

10" Two-Way Multipurpose Self-PoweredSound Reinforcement System

1010

10" Two-Way Multipurpose Self-Powered Sound

Reinforcement System PRX710 is a compact and ultra-lightweight speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size.

FEATURES

  • 133 dB peak SPL

  • 10" low-frequency driver for low-distortion and higher SPL

  • 1.5" diameter next generation JBL neodymium compression driver

  • JBL designed waveguide for accurate coverage

  • Efficient Class-D amplifier technology

  • Normal and Boost user selectable EQ presets

  • DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ

  • Line level and direct microphone input capability

  • Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through

  • Integrated 36 mm pole mount socket

  • Integrated handle with injection molded backing cup for easy transport

  • Integrated M10 suspension points for easy setup

  • Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.

  • Cloth backed, dent-resistant 16 gauge steel grilles

APPLICATIONS

  • The PRX710 is the most compact and versatile speaker in the PRX700 Series. Designed to deliver maximum performance for its weight and size as a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX700 Series subwoofer, offering a high performance self-powered sub/sat system.

  • The PRX710 is comprised of a 10" woofer, a 2408H-2, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 100° by 60° horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.

  • All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of

    1000 lbs. each.

  • The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.


Power Rating
1500 W
  AC Power Input 100V - 240V~ 50/60 Hz
  Frequency Range (-10 dB) Normal: 50 Hz – 19.6kHz
Boost: 42.9 Hz – 20kHz
  Frequency Response (±3 dB) Normal: 63.5 Hz – 18.5kHz
Boost: 53 Hz – 18.6kHz
  Coverage Pattern 100° x 60° nominal
  Directivity Index (DI) 9 dB
  Directivity Factor (Q) 8
  Crossover Frequency 1.9 kHz
  Maximum SPL 133 dB
  Signal Indicators Limit: Yellow LED indicates peak output has been reached and dsp
limiter is acting
Signal: Green LED indicates signal present
Power/Standby: Blue indicates system has power and ready to pass audio, 
Red indicates system has power but is in a power saving mode and will not 
pass audio.
  Dynamic Control (Input) dbx Type IV™ limiter circuit
  Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced)
  LF Driver 1 x JBL M110-4 250mm (10 in) woofer
  HF Driver 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver
  Enclosure Trapezoidal, 18 mm, plywood
  Suspension / Mounting single 36 mm pole socket, 8 x M10 Suspension Points, 1 x M10 pull back point
  Transport 1 x integrated handle with injection molded backing cup
  Finish Obsidian DuraFlex™ finish
  Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
  Input Connectors 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
  Output Connectors 1 male XLR balanced output
  Dimensions (H x W x D) 498.7 mm x 335.6 mm x 322.3 mm
(19.63 in x 13.21 in x 12.69 in)
  Net Weight 16.4 kg (36 lb)

Sản phẩm liên quan


Head: 190/1 Ba Cu, TP. Vũng Tàu, Việt Nam Showroom: 206 Ba Cu, P3, TP.Vũng Tàu
0254 3854154 0254 6254182
24/7 Hỗ trợ : 0903375023 Skype: duckhanhelectronic
Fanpage:
Duckhanh.com.vn © 2014